Fire Cam Glass Lens Replacement Kit
$2.95
Order this camera glass lens replacement if your current model is cracked by an impact.
To replace glass lens: Unscrew the lens cap from the camera body. On the inside of cap is a thick washer to remove. Insert small needle nose or snap ring pliers or similar tool into the 2 holes in the washer and unscrew. Remove the glass lens and reuse the o-ring that goes between the cap and glass for waterproof seal. Insert camera lens replacement onto o-ring and screw washer on. Do not overtighten washer.
This kit includes (2) glass lens replacements for your Fire Cam helmet camera.
**There is a limit of two camera lens replacement kits per customer. If you have a specific need, feel free to contact us directly.**
| Weight | 0.062499999944884 lbs |
|---|---|
| Camera |
Additional Information
Information coming soon…
FIRE CAM® LIMITED WARRANTY
Fire Cam® warrants its products against defects in material or workmanship for 12 months from date of purchase. Fire Cam® manufactures Fire Helmet Cameras® and Oncall® Body Worn Cameras. As the SOLE and EXCLUSIVE REMEDY and at its option, Fire Cam® will repair or replace the item at no charge if we determine the item to be defective. This warranty shall not apply to any item subject to misuse, failure by purchaser to follow instructions, product modification, ordinary wear and tear, or negligent or improper operation. This product should not be used in concrete training towers or flashover chambers where they could sustain high temps for long periods of time. Electronic damage due to over-voltage, incorrect polarity from product power supplies, or incorrect MAINS voltage are excluded from coverage. DO NOT USE ANY AFTERMARKET CHARGERS FOR YOUR CAMERAS. Fire Cam® chargers are designed specifically for Fire Cam® only. Modification, repair, or attempted repair by anyone other than Fire Cam® or without the written permission of Fire Cam® will void this warranty. This warranty covers the cost of factory repair, labor and parts on eligible equipment. After inspection, if it is determined that the Fire Cam® does not require repair or replacement, the purchaser shall be responsible for return shipping charges.
THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, OR ARISING FROM A COURSE OF DEALING OR USAGE OF TRADE, GIVEN BY FIRE CAM WITH RESPECT TO ANY PRODUCTS SOLD PURCHASER. The end user is solely responsible for complying with all laws that may govern your use of this product.
Fire Cam® Damage warranty
ALL Customers who purchase directly through Fire Cam® receive the “Fire Cam® Damage” warranty. Fire Helmet Cameras® are covered under the “Fire Cam® Damage” warranty throughout the one year limited warranty period. If your camera’s components accidentally get heat or water damage at an incident, you are covered for one FREE repair. Fire Cam® products are not recommended for training buildings or flashover chambers where it could sustain high temps for long periods of time. If you are out of warranty, please note, all components of our Fire Helmet Cameras® are replaceable at an additional cost-contact us for details. We are the ONLY Fire Helmet Camera® manufacturer and the ONLY company that offers this type of warranty.
Troubleshooting
Please contact Fire Cam® Customer Support at 618-416-8390 and speak to a Fire Cam® specialist.
In The Box
Information coming soon…