CrystalSky 5.5” High Brightness Display

Please note that the bracket is NOT included with the DJI CrystalSky 5.5″ High Brightness Monitor.  We do have brackets available-must call to place order.

The 5.5” CS only comes with (1) WB37 and a charge base without AC adapter or power cable.

Created for outdoor aerial imaging, the CrystalSky high brightness drone monitor features a screen that is clearly visible in sunlight.

SMOOTHER VIDEO DISPLAY

The DJI CrystalSky 5.5″ sunlight-readable display monitor uses optimized video decoding to decode video in real time. Due to limitations in software access on smartphones and tablets, video decoding in other smart devices is less than ideal. When used to view photos or videos transmitted by the camera, problems can occur including video jitter, long latency and more. The DJI CrystalSky 5.5″ monitor’s optimized decoder provides smooth, real-time video with minimal latency.

CUSTOMIZED SYSTEM AND DJI GO/DJI GO 4

A newly designed system removes unnecessary Android apps and services and is resistant to viruses and junk software. This ensures that the DJI CrystalSky 5.5″ high brightness monitor is able to offer optimum performance at all times. Its embedded DJI GO/DJI GO 4 app provides full access to all DJI GO/DJI GO 4 features including aircraft parameter adjustment, camera control, footage management, and playback. Using offline maps, this rescue drone camera monitor keeps maps available even if going out of Wifi reach.

POWER SUPPLY

A two-cell 4920 mAh secondary external battery gives this sunlight-readable monitor a longer operating time than comparable mobile devices. It supports quick charge, and controls its discharge rate well even in low temperatures. Used with the 7.85″ and 5.5″ screens, it can achieve a maximum operation time of 4-5 hours and 5-6 hours respectively.

DUAL SD CARD SLOTS

Equipped with dual Micro SD Card slots, the DJI CrystalSky 5.5″ high brightness monitor storage can be extended, or footage recorded on a Micro SD Card can be played back directly on the monitor. This rescue drone camera monitor can also be used for footage backups.

This sunlight-readable display monitor supports H.264 and H.265 video decoding, allowing it to play back these files at 30 fps and 60 fps respectively. These videos can also be output through its HDMI port.

PORTS AND NETWORK

The CrystalSky 5.5″ monitor’s HDMI port allows up to 4K video to be output to FPV goggles and other display devices. Built-in dual-band Wi-Fi means it can connect to Wi-Fi networks and Wi-Fi hotspots from mobile devices, and it is also compatible with 4G dongles and USB storage through its USB-A port.

When connected to the internet, the DJI CrystalSky 5.5″ monitor gets easy access to system upgrades, live streaming, photo or video sharing, data synchronization and more. File sizes are optimized as much as possible to minimize mobile data demands.

Onboard Micro USB and USB-C ports make it convenient to connect with a remote controller or other devices.

EXTREME TEMPERATURE OPTIMIZED

Most smart devices are designed to operate in common temperature ranges. The external battery has been designed for more extreme temperatures. It is able to operate in as low as -4°F (-20°C) and, with its internal cooling system, functions normally in temperatures as high as 104°F (40°C).

DJI AERIAL SYSTEM COMPATIBILITY

The DJI CrystalSky 5.5″ high brightness drone monitor can quickly connect to the Inspire series, Phantom 4 series, Phantom 3 series (Phantom 3 Professional, Phantom 3 Advanced), Matrice series, and Osmo series (except the Osmo Mobile) over Wi-Fi or via a remote controller USB port, depending on your specific product.* Also, it easily attaches to the Cendence remote controller without an additional mounting bracket.